Omron MX2 Product Information

12 Frequency inverters
C Communication option boards
D Braking unit, braking resistor unit
E Computer software
Types Model Description Functions
Communication options
3G3AX-MX2-PRT Profibus option card
Used for running or stopping the inverter, setting or referencing parameters, and monitoring
output frequency, output current, or similar items through Profibus communications with the
host controller.
3G3AX-MX2-DRT DeviceNet option card
Used for running or stopping the inverter, setting or referencing parameters, and monitoring
output frequency, output current, or similar items through DeviceNet communications with the
host controller.
3G3AX-MX2-ERT Ethercat option card Under development
3G3AX-MX2-CRT CompoNet option card
Used for running or stopping the inverter, setting or referencing parameters, and monitoring
output frequency, output current, or similar items through CompoNet communications with the
host controller.
3G3AX-MX2-ML2 Mechatrolink II option card Under development
3G3AX-MX2-CORT CanOpen option card Under development
Inverter Braking resistor unit
Voltage
Max.
motor
kW
Inverter MX2@
Connectable
min.
resistance Ω
Inverter mounted type
(3 %ED, 10 sec max)
Braking
torque %
Inverter mounted type
(10%ED, 10 sec max)
Braking
torque %
3-phase 1-phase Type AX- Resist Ω Type AX- Resist Ω
200 V
(single-/
three-
phase)
0.12 2001 B001
100
REM00K1400-IE 400
200
REM00K1400-IE 400
200
0.25 2002 B002 180 180
0.55 2004 B004
REM00K1200-IE 200
180 REM00K1200-IE 200 180
1.1 2007 B007
50
100 REM00K2070-IE 70 200
1.5 2015 B015
REM00K2070-IE 70
140 REM00K4075-IE 75 130
2.2 2022 B022
35
90 REM00K4035-IE 35 180
4.0 2040 - REM00K4075-IE 75 50 REM00K6035-IE 35 100
5.5 2055 – 20
REM00K4035-IE 35
75 REM00K9020-IE 20 150
7.5 2075 –
17
55 REM01K9017-IE 17 110
11 2110 - REM00K6035-IE 35 40 REM02K1017-IE 17 75
15 2150 - 10 REM00K9017-IE 17 55 REM03K5010-IE 10 95
400 V
(three-
phase)
0.55 4004 –
180
REM00K1400-IE 400
200
REM00K1400-IE 400
200
1.1 4007 – 200 200
1.5 4015 – REM00K1200-IE 200 190 REM00K2200-IE 200 190
2.2 4022 –
100
REM00K2200-IE 200 130
REM00K5120-IE 120
200
3.0 4030 –
REM00K2120-IE 120
160 160
4.0 4040 – 120 REM00K6100-IE 100 140
5.5 4055 –
70
REM00K4075-IE 75
140 REM00K9070-IE 70 150
7.5 4075 – 100 REM01K9070-IE 70 110
11 4110 - REM00K6100-IE 100 50 REM02K1070-IE 70 75
15 4150 - 35 REM00K9070-IE 70 55 REM03K5035-IE 35 110
Types Model Description Installation
Software
CX-drive Computer software Configuration and monitoring software tool
CX-One Computer software Configuration and monitoring software tool
In the interest of product improvement, specifications are subject to change without notice.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
Cat. No. I113E-EN-02

Omron MX2 Specifications

General

Model	MX2
Category	Inverter
Enclosure Rating	IP20
Control Method	V/f control, Sensorless vector control
Frequency Range	0.1 to 400 Hz
Protection	Overcurrent, Overvoltage, Undervoltage, Overheat, Short circuit
Communication	Modbus RTU
Ambient Temperature	-10 to 50 °C (without freezing or condensation)
Overload Capacity	150% for 60 seconds
Cooling Method	Fan Cooled
Humidity	5 to 95% RH (without condensation)
Altitude	Up to 1000m without derating
Voltage	200-240 VAC, 380-480 VAC
Braking Unit	Built-in (for certain models), Optional External