Omron NA Series Practices Guide

25
5-1-2 Display Unit Production Information
1. Press the Safety CPU Demo
Screen.
2. I/O Table Screen for connected
controllers appears.
If six or more units are installed,
press the button [◀] or [▶] to move
to the right or left pages.
3. Press the [Production Information]
button of the unit you want to
check.
4. The information on the selected
unit is displayed. You can see
details as the following:
・Slot No.
・Model
・Unit version
・Lot No.
・Serial No.
・Hardware version

Omron NA Series Specifications

General

Touch Panel	Resistive
Interfaces	USB, Ethernet, RS-232/422/485
Operating Temperature	0°C to 50°C
Power Supply	24 VDC
Protection Rating	IP65 (front panel)
Storage Temperature	-20°C to 60°C
Display Type	TFT LCD
Dimensions	Varies depending on the model
Weight	Varies depending on the model