Omron NA Series

27
Precautions for Correct Use
Once the "Current Safety Signature" is registered, the data will be retained even after you turn off
NA. If the Current Safety Signature has already been registered, the [Match] lamp will turn on as the
Safety Signature Viewer screen appears.
Precautions for Correct Use
Even if you have logged in before registering a safety signature after starting NA, the login screen
will appear to prevent incorrect entry. Log in again following Step 4.
4. Press [Registration].
5. Password Validation screen
appears. Then enter the
password, omron123.
6. Press [Registration].
7. The current safety signature
information and registration time
are recorded in the registered
safety signature. Then, [OK] lamp
turns green.