5-5
5 Modbus Connection
NB-series Programmable Terminals Host Connection Manual (V108)
5-3 Communication Parameter Setting
5
When Using Modbus RTU Slave Protocol
PT default communication parameters: 9600bps (Baud Rate), 8 (Data Bit), even (Parity Check), 1 (Stop
Bit) and 1 (PLC Station No.)
When Using Modbus ASCII Protocol
PT default communication parameters: 9600bps (Baud Rate), 8 (Data Bit), even (Parity Check), 1 (Stop
Bit) and 1 (PLC Station No.)
To Next Page
Loading...
