7 Connecting to LSIS PLCs
7-4
NB-series Programmable Terminals Host Connection Manual (V108)
7-3 Communication Parameter Setting
When Using LS Master-K Cnet Protocol
PT default communication parameters: 38400bps (Baud Rate), 8 (Data Bit), none (Parity Check),
1 (Stop Bit) and 1(PLC Station No.)
RS232 Communication
RS485 Communication
When Using LS Master-K CPU Direct Protocol
PT default communication parameters: 38400bps (Baud Rate), 8 (Data Bit), none (Parity Check),
1 (Stop Bit) and 1 (PLC Station No.)
PT Settings
To Next Page
Loading...
