2-5
2 Connecting to SIEMENS PLCs
NB-series Programmable Terminals Host Connection Manual (V108)
2-3 Communication Parameter Setting
2
2-3-2 When Using SIEMENS S7-300/400 (PC Adapter Direct) Communication Protocol
PT default communication parameters: 19200bps(Baud Rate), 8(Data Bit), 2(Stop Bit), odd (Parity
Check) and 2 (PLC Station No.) (Multiple Station No. is not supported.)
RS232 Communication
PLC Settings
2-3-2 When Using SIEMENS S7-300/400 (PC Adapter Direct)
Communication Protocol
PT Settings
To Next Page
Loading...
