Omron NE1A-EDR01 - Ethernet;Ip-Devicenet Router; Accessing All Devices on a Network from a Network Configurator

2
EtherNet/IP-DeviceNet Router Section 1-1
1-1 EtherNet/IP-DeviceNet Router
The NE1A-EDR01 EtherNet/IP-DeviceNet Router is an FA router with one
Ethernet port and one DeviceNet port, and is used for routing messages
between Ethernet and DeviceNet Networks. In this manual the NE1A-EDR01
EtherNet/IP-DeviceNet Router is called the “ED Router.”
1-1-1 Accessing All Devices on a Network from a Network Configurator
Using an ED Router makes it possible to set devices, such as NE1A-series
Controllers and DST1-series Slaves, from a Network Configurator running on
a PC connected to an Ethernet or EtherNet/IP Network.
In addition, when multiple DeviceNet or DeviceNet Safety Networks are con-
figured for an Ethernet or EtherNet/IP connection using an ED Router, it is
possible to set devices such as NE1A-series Controllers and DST1-series
Slaves connected to another DeviceNet or DeviceNet Safety network from a
Network Configurator running on a PC connected to a DeviceNet or NE1A-
series USB port.
Note (1) To access other networks, use the NE1A-SCPU01-V1 (unit version 2.0 or
later) or the NE1A-SCPU02 (unit version 2.0 or later) to connect the Net-
work Configurator.
(2) To access other networks, use Network Configurator version 2.0@ or
higher.
ED Router
(NE1A-EDR01)
Ethernet (EtherNet/IP)
USB
DeviceNet Safety
NE1A Safety Network
Controller
DeviceNet Safety
DST1-series Slaves
DeviceNet Safety
DST1-series Slaves
DeviceNet Safety
Network
Configurator
Network
Configurator
Network
Configurato
r