7．Connection Procedure
2
Confirm that the DeviceNet
communications are performed
normally from the Network
Configurator by referring to the
status information on the Monitor
Device Dialog Box.
Right-click the master icon on the
Network Configuration Pane, and
select Monitor.
3
The figure on the right shows the
Status Tab Page of the Monitor
Device Dialog Box.
DeviceNet communications are
normally performed if the same
items on the right are selected in the
Master Status Field, slave #00 is lit
blue, and the Remote I/O
Communications Running Check
Box is selected.
Click the Close Button.
(Monitor Device Dialog Box)
40
To Next Page
Loading...
