Omron NP3 Series

4-4 Creating Screens
4
4
88 NP Introduction Manual
Creating Screens
●Function Switches
Set the function switches.
For details, refer to [01 Waiting].
See below for the details.
The [07 Check2] screen is now complete.
■ [08 Check3]
The system shows the [08 Check3] screen, when a user pushes the screen
switching button on the [07 Check2] screen.
Set these functions:
• The screen displays the present [TIM0000] and [CNT0000] values that the
ladder program uses.
• Buttons are used to switch to the [07 Check2] screen and the system menu.
• Each Function switch operates [Open], [Stop], or [Close] shutter action.
Item (Function) Setting
Function Momentary
Write Address Internal Memory:$0.00
Read Address Internal Memory:$0.00
Item (Function) Setting
Function Momentary
Write Address Internal Memory:$0.00
Read Address Internal Memory:$0.00
Item (Function) Setting
Function Momentary
Write Address Internal Memory:$0.00
Read Address Internal Memory:$0.00