What to do if there is a routing table setting error in Omron NS10-TV?
If there's a routing table setting error in your Omron Touch terminals, remake and set the routing tables correctly. When the routing tables are not being used, delete the routing tables.
What to do if no nodes have been set as polling node on Omron Touch terminals?
If no nodes have been set as polling node on your Omron Touch terminals, set the polling node using the CX- Server.
General| Display Type | TFT LCD |
|---|---|
| Touch Type | Resistive |
| Backlight Life | 50, 000 hours |
| USB Port | USB 2.0 |
| Ethernet | 10/100 Mbps |
| Serial Port | RS-232C |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -20°C to 60°C |
| Humidity | 10% to 90% (non-condensing) |
| Shock Resistance | 147 m/s², 3 times each direction |
| Power Supply | 24 VDC |
| Protection Rating | IP65 (front panel) |
| Vibration Resistance | 10 to 57 Hz: Amplitude 0.075 mm, 57 to 150 Hz: 9.8 m/s2 |
Specifies the system configuration requirements for NS-V1/V2 models to connect via Host Link.
Lists OMRON PLCs compatible for connection as hosts using Host Link communications.
Details connecting NS-V1/V2 PTs to hosts via RS-232C ports, including compatible units and settings.
Explains connecting NS-V1/V2 PTs to hosts via RS-422A/485 ports, including compatible units.
Guides on creating screen data using CX-Designer for Host Link communication setup.
Describes the procedure for transferring screen data from CX-Designer to the NS-V1/V2 PT.
Details setting the communications method and baud rate for serial ports on the NS-V1/V2 PT.
Details the PLC memory areas usable for Host Link communications in OMRON C-series PLCs.
Specifies the PLC memory areas usable for Host Link communications in CVM1/CV-series PLCs.
Specifies the required CX-Designer project versions for successful Host Link communication.
Identifies which serial ports (A or B) on NS-V1/V2 PTs are supported for Host Link.
Lists the NS-series PT models that are compatible with Host Link communications.
To Next Page
