Task Management
109
Tasks
Task provides an interface between a unit and a PLC.
Using mathematical operations on unit tags or PLC’s tags user can monitor the data. User can use
these tasks in following events -
1. Application Tasklist
2. Screen Tasklist
3. Key Tasklist
6.1 Application TaskList
Using this screen two types of tasklist can be defined.
1) Power On Tasks : These task execute only once when NTXS unit is powered on.
2) Global Tasks : Tasks from this task list execute globally i.e. always.
Using Up / Down buttons tasks can be shifted up or down. Using Delete button selected task can be
removed from List of TaskList.
To Next Page
Loading...
