Omron NTXS - Omron Cable References (PLC Ports); Omron Programming Cable

Appendix
170
A Omron Cable References and Diagrams
1 Omron Cable References for connection to PLC’s peripheral ports (CMOS)
NTXS Type Cable Type PLC Type Note
NT2S-SF121B-EV2 NT2S-CN212-V1 (5 Meter) CPM1A Units are externally powered
with NT2S-CN215-V1
(5 Meter) CPM2A 24 VDC.
NT2S-SF125B-E (Peripheral connector) CQM1
NT3S-ST121B-E NT2S-CN223-V2 (2 Meter) CPM2C
NT3S-ST123B-E (Mini-peripheral connector) CQM1H
NT3S-ST124B-E CJ1
NT3S-ST126B-E CS1
NT2S-SF122B-EV2 NT2S-CN222-V1 (2 Meter) CPM1A Units are powered from PLC’s
NT2S-SF123B-EV2 NT2S-CN225-V1 (5 Meter) CPM2A peripheral port.
NT2S-SF126B-E (Peripheral Connector) CQM1
NT2S-SF127B-E NT2S-CN224-V1 (2 Meter) CPM2C
(Mini-peripheral connector) CQM1H
CJ1
CS1
2 Omron Cable References for connection to PLC’s serial ports (RS232C)
NTXS Type Cable Type PLC Type Note
NT2S-SF121B-EV2 NT2S-CN232-V1 (2 Meter) CP1H Units are externally powered
with NT2S-CN235-V1
(5 Meter) CPM2A 24 VDC.
NT2S-SF125B-E (9psubD to 9psubD) CQM1(H)
CJ1
NT3S-ST121B-E CS1
NT3S-ST123B-E
NT3S-ST124B-E
NT3S-ST126B-E
NT2S-SF122B-EV2 NT2S-CN242-V1 (2 Meter) CP1H Units are powered from the PLC’s
NT2S-SF126B-E (9psubD to 9psubD) CPM2A serial port.
CQM1(H)
CJ1
CS1
3 Omron Cable References for Programming cable (PC to NTXS)
NTXS Type Cable Type PLC Type Note
NT2S-All NT2S-CN002 (2 Meter) - -
NT3S-All (9psubD to 9psubD)