Printing
155
10.1 Printing from NTXS unit
1. Configure printing port by selecting Baud rate, Parity and No of Bits from Network Configuration.
2. Presentation of screen on printer page decided by No of Columns, Terminating Character and
number of characters to print.
3. Number Of Columns : By default this field is set to 80. But user can set any value upto column
width of printer. Maximum limit is 80.
4. Terminating Character : By default this char is NONE, options are given below :
NONE : No char.
CR : Carriage returns.
LF : Line Feed.
CR + LF : Carriage return + Line Feed
NTXS will send selected terminating character after completion of number of characters decided in No
of column field.
5. Number of characters to print: User can select how many characters he want to print from
screen. Please note that user cant select starting location for printing, it is always Considered as
a top left of the screen.
To Next Page
Loading...
