Appendix
200
C List Of Features
The next chapter will guide you through the creation of your first project. Before you proceed, you may
wish to read this brief list of some of the features offered in the NTXS.
ICON NAME DESCRPITION
Data Entry Edits any register or coil from the PLC using NTXS
Keypad.
Display Data Displays the text depending on the bit status or the
value of the PLC Data register.
Time Displays the time in the format HH:MM:SS or HH:MM
Date Displays date in the format DD/MM/YY or MM/DD/YY.
Alarm Displays the alarm text when alarm occurs
Line Draws line on the unit screen.
Rectangle Draws rectangle on the unit screen.
Ellipse Draws ellipse on the unit screen.
Rounded Rectangle Draws rounded rectangle on the unit screen.
Single Bargraph Changes the bar height/width according to the value in
the PLC register
Bitmap Used to draw bmp images on the NTXS display
Bit Button Performs the key’s specific task or screen tasks.
Bit Lamp Lamp object can be used as state indicator for
displaying state of PLC coil.
Word Button Performs a set of tasks based on the number of logical
states defined in the configuration.
To Next Page
Loading...
