Using NTXS Software
56
4.5 Display Data Object
This object is used to display the contents of the register or coil.
Procedure-
1. Click on ‘Display Data’ from objects toolbar. The mouse pointer will change to the tool shape.
2. Now place the mouse pointer at desired location and click the left mouse button. The data entry dialog
box will appear.
Display data object is explained in detail in chapter 5.
4.6 Global And Power On Task
1. Power-on Tasks - Tasks specified under this option execute only once when unit is powered on.
2. Global Tasks - Tasks specified under this option execute continuously as long as unit is powered.
To Next Page
Loading...
