Representing Data
63
8. Popup : If user wants to enter data with popup keypad then user has to check Keypad option and
also select popup screen number from list. If user don’t want popup data entry then he has to add static
numeric keypad object on screen .
Note:- Math operations operate only on unsigned values and unsigned result e.g. If first operation is
divided by 100 and tag value is 25 then result will be stored as zero and not 0.25.
Click ‘Ok’ button to add the object on screen.
5.1.3 Display Data
Procedure
1. Click on ‘Display Data’ from object toolbar. The mouse pointer will change to the tool shape.
2. Now place the mouse pointer at desired location and click the left mouse button. The data entry dialog
box will appear.
Type- Bit Text
This object displays text depending on the bit status.
1. Coil-Tag : Select Coil tag from the list.
2. On Text : Enter On text maximum up to 40 characters.
3. Off Text : Enter Off text maximum up to 40 characters.
Click ‘Ok’ button to add the object on the screen.
To Next Page
Loading...
