Using NTXS Software
58
4.7 Global Keys
Define tasks for these key events -
Press Tasks – These tasks are performed only once when the key is pressed.
Pressed Tasks – These tasks are performed as long as the key is pressed.
Released Tasks – These tasks are performed when the key is released.
Tasks defined for Global Keys are executed for whole application, independent of which screen is being
displayed.
Close - Accepts the selected task.
Up arrow -Shifts the selected task upwards.
Down arrow -Shifts the selected task downwards.
Delete -Deletes the selected task.
Show used double keys -Shows the list of combination keys used to define the tasks.
Single Key -If this option is selected, a task is defined on a single key.
Two simultaneous keys -If this option is selected, a task is defined on a combination of
two keys.
Note: Global keys Task list is applicable for only NT2S Products.
To Next Page
Loading...
