Language Wizard
143
7.4.2 Displaying Multiple Languages in Unit
System Register S0001 controls the language to be displayed at run time. User can use ‘Write value to
tag’ task for changing value in system register.
Note : If S0001 has value other than 1 to 9 then English language is displayed.
Example:
If user has configured project for 3 different languages namely English, Korean, Japanese then following
tasks can be used to change language at run time.
English - Write value to Tag S0001 with value 1
Korean - Write value to Tag S0001 with value 2
Japanese - Write value to Tag S0001 with value 3
In this way 9 different languages can be displayed in unit at run time.
Following table shows the value of System Register S0001.
Language Tag Value Description
0 Default Value : English
1 English
2 Configurable Language
3 Configurable Language
4 Configurable Language
5 Configurable Language
6 Configurable Language
7 Configurable Language
8 Configurable Language
9 Configurable Language
To Next Page
Loading...
