Task Management
130
Note: Task 1 to Task 31 operates only for data entry object.
No. Tasks Description
27 Numeric Key D Allows user to enter ‘D’ at cursor location.
28 Numeric Key E Allows user to enter ‘E’ at cursor location.
29 Numeric Key F Allows user to enter ‘F’ at cursor location.
Note: Numeric keys A to F are applicable for HEX data entry only.
30 Edit Bit On This task operates only on coil / bit tags. Coil / bit is set to 1 from this
task.
31 Edit Bit Off This task operates only on coil / bit tags. Coil / bit is set to 0 from this
task.
32 Acknowledge Alarm Acknowledges the first alarm (top position in the Real time alarm
window)
33 Acknowledge All Alarms Unlike Acknowledge Alarm task, this task acknowledges all alarms.
34 Previous Alarm The alarm display position in the Real time alarm container is shifted
one position up.
35 Next Alarm The alarm display position in the Real time alarm container is shifted
one position down.
36 Previous Historical Alarm The alarm display position in the Historical alarm container is shifted
one position up.
37 Next Historical Alarm The alarm display position in the Historical time alarm container is
shifted one position up.
38 Clear All Historical Alarms Clears all the historical alarms.
To Next Page
Loading...
