i
Preliminary
Thank you for purchasing NTXS Series product from Omron. NTXS Series Products are versatile
operator interfaces with Microsoft Windows® based configuration Software.
This manual will help you to safely install, configure and operate NTXS Products.
All the safety warnings and precautions must be followed to ensure proper unit performance and per-
sonal safety.
Warnings used in this manual:
DANGER Danger Warnings are used to indicate situations, ocations
and conditions that can cause serious injury or death.
CAUTION Caution Warnings are used to indicate situations and conditions
that can cause operator injury and/or unit damage.
If additional information or technical assistance is needed please contact:
Omron Europe B.V.
Wegalaan 67-69
NL-2132 JD Hoofddorp
The Netherlands
Phone :(+31)23-5681300
Fax :(+31)23 5681388
URL: www.omron-industrial.com
Manual Revisions:
If you contact us in reference to this manual, please include the following document number:
Name: NTXS Manual
Document: V03E-EN-02
IMPORTANT
NTXS Series Products are intended to be operator interfaces, to work with PLCs which
actually take control actions. It is assumed that the user is well acquainted with the PLC
system being used. Never use NTXS units to perform emergency stop applications. It is
advised that separate switches be used outside the PLC for ANY emergency stops.
Any mechanical or electrical modification to the units will
void all warranties.
!
To Next Page
Loading...
