Variable name Meaning Function Data type
Range of
values
Reference
_EIP2_TargetPL-
CErr[255]
CIP Communica-
tions2 T
arget PLC Er-
ror Information
Shows the error status (logical OR of fa-
tal and non-fatal errors) of the target
node Controllers that are connected for
CIP communications 2, with the built-in
EtherNet/IP ports as the originator. The
array elements are valid only when the
corresponding Normal Target Node Infor-
mation is TRUE. The immediately pre-
ceding value is retained if this variable is
FALSE.
Array[x] is TRUE:
A fatal or non-fatal error occurred in the
target Controller with a target node ID of
x.
Array[x] is FALSE:
Other than the above.
Note You can use this system-de-
fined variable only for the
NX701 CPU Units and NX102
CPU Units.
ARRAY
[0..255] OF
BOOL
TRUE or
FALSE
page 3-57
3 System-defined Variables Related to the Built-in EtherNet/IP Port
3-29
NJ/NX-series CPU Unit Built-in EtherNet/IP Port User’s Manual (W506)
3-2 System-defined Variables
3
To Next Page
Loading...
Need help?
General
