Omron Powli BU50SW - 8 Using an Snmp;Web Card; Adding an Snmp;Web Card

BU50SW / BU75SW / BU100SW / BU150SW
53
1
2
3
4
5
6
7
8
9
10
An SNMP/Web card can be loaded into the card slot on the back of the unit. Remove the contact signal card
that the unit came equipped with, and plug the SNMP/Web card in its place. Store the removed contact sig-
nal card in a safe place.
•
SNMP/Web card (model number: SC20G), sold separately
(1) Remove the 2 screws, and carefully pull out the contact signal card.
(2) Carefully insert the SNMP/Web card (model number: SC20G), and securely tighten the 2 screws.
* Replace with BU50SW/BU75SW/BU100SW/BU150SW brackets.
8-1
Adding an SNMP/Web card
Using an SNMP/Web card
88