Omron Powli BU75RW - Equipment Failure Displays and Beeps Continued

3.Operation
32
OFF
OFF
OFF
There is a problem with the unit.
Contact the shop of purchase or the
OMRON Electronic Systems &
Equipments Customer Support Center
at: __________.
31
32
Failure occurred. When the beep
stop switch is pressed, the details
of the error are displayed.
33
(Same as above.)
Stopped charging due to
abnormal drop in battery charge
voltage.
Displays the details of the error that
occurred only while pressing the beep
stop switch while in state No. 31.
Continuous
Continuous
Continuous
No.
Status
indicator
Power supply
output
lamp
Beep Charging Description Solution
Bypass
operation
lamp
Battery
replacement
lamp
4. Displays and beeps when there is an equipment failure
(2) When power switch is OFF
( indicates blinking)
( indicates the display is ON)
( indicates the display is OFF)
Stopped charging due to
abnormal rise in battery charge
voltage.
Seealso
Replacingthebattery
46Page
5. Display and beep for battery replacement
34
The battery test detected
a weak battery
(warning only, output continues).
Replace the battery.
You can replace the weak battery
with a separately purchased
replacement battery as needed.
Intermittent
2-second
intervals
ON