BU75RW/BU100RW/BU200RW/BU300RW
7
63
When using the included "UPS service driver", the OS standard UPS service in Windows Server 2003/
XP/2000 can be used. When there is a power failure, fi les can automatically be saved and the com-
puter can be shut down.
Check our website for the most recent version (http://www.omron.co.jp/ese/).
7-2-1. Connect the UPS to a computer.
* Only 1 computer can be connected to the UPS
Cable: Included connection cable (RS-232C or USB)
* The RS232C cable and USB cable cannot be used at the same time.
<RS-232C>
7-2-2. Install the included "UPS service driver" on the computer.
Software to install: UPS service driver
How to install: Refer to the separate "UPS monitoring software installation guide".
7-2
When performing auto-save functions using
the UPS service in Windows Server 2003/
XP/2000 + UPS service driver
Connector
Connector
Connector
Connector
USB
Port
USB
Port
Connect to
USB Port
on UPS
Connect to USB
port on PC
Connect to USB
port on PC
Included connection cable(USB)
Included connection cable(USB)
Connect to
USB Port
on UPS
Connect to
USB terminal
Connect to
USB terminal
<USB>
BU200RW/BU300RW
Connect to
RS-232C
port on PC
Connect to
RS-232C
port on PC
Included connection cable(RS232C)
Included connection cable(RS232C)
To Next Page
Loading...
