Omron Powli BU75RW - UPS Monitoring Software for Mac; Connecting and Installing Mac Software

BU75RW/BU100RW/BU200RW/BU300RW
7
61
7-1-2. Install the included UPS monitoring software on each computers.
Software to install: Power Act Pro
How to install: Refer to the separate “UPS monitoring software quick installation guide”.
* When connecting 2 or more computers to the UPS
Switching hub
UPS (Image shows BU300RW.)
PC server 3
Power cable
Power cable
Power cable
LAN connection
Remote connection
The Included connection cable (RS-232C or USB)
Power cable
PC server 2
PC server 1
Network
●
When using UPS Power Manager “UPS monitoring software for Mac”
1. Connect the UPS to a computer.
Cable: Included USB communication cable
* Only 1 computer can be connected to the UPS
2. Install the included UPS monitoring software on the computer.
Software to install: UPS Power Manager
How to install: Refer to the separate “UPS monitoring software quick installation guide”.
<USB>
RS-232C端子RS-232C端子
に接続するに接続する
コネクタ
Connector
Connector
Connector
Connector
USB
Port
USB
Port
Connect to
USB Port
on UPS
Connect to USB
port on PC
Connect to USB
port on PC
Included connection cable(USB)
Included connection cable(USB)
Connect to
USB Port
on UPS
Connect to
USB terminal
Connect to
USB terminal
“UPS Power Manager” UPS monitoring software for Mac
When using Macintosh computers, the included “UPS Power Manager” UPS monitoring software
enables you to automatically shut down the system when power failures or other input power sup-
ply problems occur.
BU200RW/BU300RW
BU75RW/BU100RW