2-27
2-2 External and Mounted Dimensions
2
Standard Models and Dimensions
For 3,000-r/min Flat Servomotors
Note 1. The standard shaft type is a shaft with key and tap.
Note 2. The diameter of the motor shaft insertion hole is the same as the shaft diameter of the corresponding
Servomotor.
Note 3. Applicable for the servomotors with key, if the key is removed.
Note 4. The dimensional drawings in this document are for showing main dimensions the details of the product
shape.
Outline Drawings
Model
Dimensions (mm)
LM LR C1 C2 D1 D2 D3 F G S T
100 W
1/5 R88G-VRXF05B100PCJ 67.5 32 60 52 70 60 50 3 15.5 12 20
1/9 R88G-VRXF09B100PCJ 67.5 32 60 52 70 60 50 3 15.5 12 20
1/15 R88G-VRXF15B100PCJ 83.5326052706050 315.51220
1/25 R88G-VRXF25B100PCJ 83.5326052706050 315.51220
200 W
1/5 R88G-VRXF05B200PCJ 77.5 32 80 52 90 60 50 3 21.5 12 20
1/9 R88G-VRXF09C200PCJ 94.5 50 80 78 90 90 70 3 21.5 19 30
1/15 R88G-VRXF15C200PCJ 105.0 50 80 78 90 90 70 3 21.5 19 30
1/25 R88G-VRXF25C200PCJ 105.0 50 80 78 90 90 70 3 21.5 19 30
400 W
1/5 R88G-VRXF05C400PCJ 94.5 50 80 78 90 90 70 3 21.5 19 30
1/9 R88G-VRXF09C400PCJ 94.5 50 80 78 90 90 70 3 21.5 19 30
1/15 R88G-VRXF15C400PCJ 105.0 50 80 78 90 90 70 3 21.5 19 30
1/25 R88G-VRXF25C400PCJ 105.0 50 80 78 90 90 70 3 21.5 19 30
F
G T
LRLM
4-Z1 (Available depth M)
4-Z2 (Available depth L)
C1×C1
Sh6 dia.
D1 dia.
D2 dia.
C2×C2
D3h7 dia.
To Next Page
Loading...
Need help?
General
