163
Setting Tag Data Links Section 6-2
3. Input the EtherNet/IP Unit’s unit number in the Unit No. Field, select the
connecting COM port number, and click the OK Button.
Usually, the Baud Rate is left at this setting.
The following dialog box will be displayed.
4. After clicking TCP:2, click the OK Button. The Network Configurator will be
connected to the EtherNet/IP network. If the Network Configurator is con-
nected online properly, On-line will be displayed in the status bar at the bot-
tom of the window.
Connecting through the CPU Unit’s USB or RS-232C Port (CJ2 CPU Units Only)
Connect to the EtherNet/IP Unit’s Ethernet port via the CPU Unit’s USB port
or RS-232C port.
1,2,3... 1. Select Option - Select Interface - CJ2 USB/Serial Port to set the com-
munications interface.
To Next Page
Loading...
Need help?
General
