Omron Sysmac NJ-series Network Connection Guide

8．Initialization Method
39
8. Initialization Method
The setting procedures in this guide are based on the factory default settings.
Some procedures may not be applicable unless you use the devices with the factory default
settings.
8.1. Initializing a Controller
To initialize a Controller, clear all memory of a CPU Unit.
With Sysmac Studio, change the operating mode of Controller to PROGRAM mode and select
Clear All Memory from the Controller Menu. The Clear All Memory Dialog Box appears.
Check the message and click OK.

Omron Sysmac NJ-series Specifications

General

Brand	Omron
Model	Sysmac NJ-series
Category	Computer Hardware
Language	English