Omron V7

EN-13
Note: Refer to user´s manual for complete list.
n089
DC injection braking current 0 to 100% 50%
n090
DC injection braking at stop 0.0 to 25.5sec 0.5sec
n091
DC injection braking at start 0.0 to 25.5sec 0.0sec
n092
Stall prevention during deceleration:
0: Enabled
1: Disabled
0.1 0
I43-EN-01+V7+Quick_Guide.book Seite 13 Dienstag, 25. April 2006 8:56 08