Omron ZEN - Page 27

7 Programming Functions ZEN Programmable Logic Module
OMRON ELECTRONICS, S.A. Page 27
Setup and operation Example Operation
When the start day is
before the stop day
MO - FR Operates Monday to
Friday every week
When the start day is
after the stop day
FR - MO Operates every Friday
through to the following
Monday
When the start day is the
same as the stop day
SU - SU Operates regardless of the
day of the week
Start and stop
days
When the stop day is not
set
SU - Operates only every
Sunday
When the start time is
before the stop time
ON: 08:00
OFF: 17:00
Operates from 8:00 to
17:00 every day
When the start time is
after the stop time
ON: 21:00
OFF: 06:00
Operates from 21:00 to
6:00 the following day
Start and stop
times
When the start time is the
same as the stop time
ON: 13:00
OFF: 13:00
Operates regardless of the
time
7.3.3. Parameter Monitoring in the ‘Screen Display’
7.4. Using Calendar Timers (*)
Calendar timers are activated on specific dates. ZEN has 8 calendar timers (*0
to *7).
Current day
Start day
Stop day
Current time
Weekly timer bit status
Start time
Stop time