42
Section 3 SETUP
ZFV
User’s Manual
Section 3
Setting Flow
Setting Flow
Preparation for Measurement
Set the Sensor Head and Amplifier Unit.
Setting of Measurement Conditions
Power ON
Installation and Connection
Adjust the focus of the image.
Adjusting the Image
Executing Teaching
Execute teaching, and register the judgement
criteria.
Settings in an application extended connection
Set the processing details for each Amplifier
Units.
Applying Settings, Performing Measurement
Set how to output the measurement values.
External I/O
(Only when Amplifier Units are gang-mounted)
Adjust the threshold values for judging the
measurement result.
Adjusting threshold values
Perform Measurement
SECTION 2
INSTALLATION & CONNECTION
p.22
p.48
p.61
p.53
p.63
p.57
SECTION 2
INSTALLATION & CONNECTION
p.40
To Next Page
Loading...
