Omron ZX2 Series

ZX2 Short Manual.doc Page 8 of 12
Setup the on-delay of the digital
outputs. See the full user manual
for details.
Setup the off-delay of the digital
outputs. See the full user manual
for details.
Setup the way how the zero-reset
value is stored (permanently or
volatile).
Setup the zero-reset value for the
zero-reset function.
Setup the function of the 2 input
terminals. Either timing and reset
in
p
uts or bank select in
p
uts.
Setup the menu between simple
(“Off”) and detailed (“On”). If
“Detail” is switched to “On” all
menu items are displayed.
Reset the sensor to the factory
defaults. All user defined settings
are deleted.
Detail
Detail
Detail
Detail
Detail