on networks N300R User Manual

N300 WiFi Router (N300R) User Manual
Configuring Basic Connectivity 1-11
May 2012
Setting Up and Testing Basic Wireless Connectivity
Follow these instructions to set up and test basic wireless connectivity. Once you have established
basic wireless connectivity, you can enable security settings appropriate to your needs.
1. Select Wireless Settings under Setup in the main menu of the N300R router.
2. For the wireless network name (SSID), use the default name, or choose a suitable descriptive
name. In the Name (SSID) field, you can enter a value of up to 32 alphanumeric characters.
The default SSID is On Networks.
Note: If you use a wireless computer to change wireless settings, you might be
disconnected when you click Apply. Reconfigure your wireless adapter to match
the new settings, or access the router from a wired computer to make any further
changes.
Figure 1-9
Note: The SSID is case-sensitive. Also, the SSID of any wireless access adapters
must match the SSID you specify in the N300R router. If they do not match,
you will not get a wireless connection to the N300R router.

on networks N300R Specifications

General

Brand	on networks
Model	N300R
Category	Network Router
Language	English