ONEAN X USER’S MANUAL
18
05
Safety GuidelineS
5. SaFety guideLineS
5.1 terMS oF uSe
• The Onean X board is suitable for fresh and salt water use. Ideal
conditions are with no wind and at water.
• Be aware of local regulations before using and the areas where this
kind of equipment is eligible for use.
• Taking into account that the jet sucks water through the intake it is
important to look for water that is free of oating elements at which
to practice this sport. Floating elements could cause damage to the
rotating components inside the jet.
• The Onean X Board has not been designed to be used at wave breaking
areas. Please look for an area of calm waters to enter the water.
• Taking into account the high speeds and maneuverability of the board,
it’s important to use the Onean X in large open spaces free of obstacles.
• Be aware of the tides. With the sea level changes, new obstacles may
arise depending on the tide.
• Avoid using this product in the vicinity of other people, vessels or objects
that may compromise the user’s or board’s security.
• Avoid crowded beaches and always respect the navigation channels.
• In case of entering the water through the beach, make use of the marked
areas that allow the entry and exit of watercrafts.
• It is advisable not to overturn/ip the board in the water.
• Do not grab or lift the board by the discharge connectors.
• Do not remove the goretex vent in the back of the board.
5.2. beFore getting into the water
• Make sure the leash and the magnetic security key (kill switch) are in good
condition.
• Make sure the remote works properly before heading to the water.
• Make sure to assemble your equipment over grass or sand in order not
to damage it. Any damage caused by manipulating your equipment over
a hard and abrasive surface will not be covered by the warranty.
To Next Page
Loading...
