OneTouch Select Plus Flex - Page 102

97
Troubleshooting your system
8
What it means
The meter has detected a
problem with the test strip.
Possible cause is that you did
not apply the correct sample
type to the test strip when
prompted by the meter for
a blood or control solution
sample.
What to do
Repeat the test with a new test strip. See page34 for
taking a blood glucose test, or page64 for taking a
control solution test. If the error message appears again,
contact Customer Service. Contact OneTouch® Customer
Care on 0800121200 (UK) or 1800535 676 (Ireland).
Y
ellow= 5mm Red=7mm mar
g
in
PF3130451Rev1_OTSPF_OB_I_GB_en_zug_R2.indd 97 3/12/15 11:36 AM
Statement of Use: Verify status before each use
Effectivity Date: Mar 18 2015 Status: Current State: Released
Type: Project File Name: 3130451 Revision: 1