OneTouch Select Plus Flex - First Time Setup; Setting the Time; Hour will Flash; Minutes will Flash

23
2
Setting up your system
First time setup
To turn your meter on, press and hold
until the start-
up screen appears. Once the device is on, release
.
The meter will now automatically prompt you to set the
time and date. The SET icon will appear on the screen to
indicate that the meter has entered setup mode.
Setting the time
Hour will flash
đƫ If the hour displayed
is correct, press
to
confirm.
đƫ If the hour displayed is not
correct, press
or to
change the hour and press
to confirm.
Minutes will flash
đƫ If the minutes displayed
is correct, press
to
confirm.
đƫ If the minutes displayed is
not correct, press
or
to change the minutes and
press
to confirm.
Y
ellow= 5mm Red=7mm mar
g
in
PF3130451Rev1_OTSPF_OB_I_GB_en_zug_R2.indd 23 3/12/15 11:35 AM
Statement of Use: Verify status before each use
Effectivity Date: Mar 18 2015 Status: Current State: Released
Type: Project File Name: 3130451 Revision: 1