25
2 
Setting up your system
Day will flash
đƫ If the day displayed is 
correct, press 
 to 
confirm. 
đƫ If the day displayed is not 
correct, press 
 or   to 
change the day and press 
 to confirm.
You are now ready to take 
a test. See the section 
Testing your blood glucose 
in Chapter 3. 
NOTE: After completing first time setup, a screen with 
three dashes will appear. Once you begin testing, your last 
result will appear in place of the three dashes, along with 
the date and time the test was taken. 
in
PF3130451Rev1_OTSPF_OB_I_GB_en_zug_R2.indd   25 3/12/15   11:35 AM
 Statement of Use: Verify status before each use
Effectivity Date: Mar 18 2015       Status: Current     State: Released
Type: Project File  Name: 3130451  Revision: 1