OneTouch Select Plus Flex Instructions For Use

62
3
Taking a test
Disposing of the used lancet and test strip
Discard the used lancet carefully after each use to avoid
unintended lancet stick injuries. Used lancets and test
strips may be considered biohazardous waste in your
area. Be sure to follow your healthcare professional's
recommendations or local regulations for proper disposal.
Wash hands thoroughly with soap and water after
handling the meter, test strips, lancing device and cap.
Testing with control solution
Control solution testing precautions
OneTouchSelect® Plus Control Solution is used to check
that the meter and test strips are working together
properly and that the test is performing correctly.
(Control solution is available separately.)
NOTE:
đƫ OneTouchSelect® Plus High Control Solution (vial with
red cap) can be used in addition to OneTouchSelect®
Plus Mid Control Solution (vial with blue cap). If you
test with OneTouchSelect® Plus High Control Solution,
you should always test with OneTouchSelect® Plus
Mid Control Solution first.
Y
ellow= 5mm Red=7mm mar
g
in
PF3130451Rev1_OTSPF_OB_I_GB_en_zug_R2.indd 62 3/12/15 11:35 AM
Statement of Use: Verify status before each use
Effectivity Date: Mar 18 2015 Status: Current State: Released
Type: Project File Name: 3130451 Revision: 1

OneTouch Select Plus Flex Specifications

General

Display	LCD
Bluetooth	Yes
Test Time	5 seconds
Measurement Range	20-600 mg/dL
Memory	500 tests
Sample Size	1.0 µL
Operating Conditions	10-90% relative humidity
Battery Type	CR2032