OneTouch Select Plus Flex - Electrical and Safety Standards

112
Detailed information about your system
9
Electrical and safety standards
This meter complies with CISPR 11: Class B (Radiated
Only). Emissions of the energy used are low and not likely
to cause interference in nearby electronic equipment.
The meter has been tested for immunity to electrostatic
discharge as specified in IEC 61326-2-6. This meter
complies with immunity to radio frequency interference as
specified in IEC 61326-1 and 61326-2-6.
The meter meets the requirements for immunity to
electrical interference at the frequency range and test level
specified in international standard ISO 15197.
Use of this meter near electrical or electronic equipment
that are sources of electromagnetic radiation, may
interfere with proper operation of this meter. It is
advisable to avoid testing in close proximity to sources of
electromagnetic radiation.
Do Not use the equipment where aerosol sprays are being
used, or when oxygen is being administered.
Y
ellow= 5mm Red=7mm mar
g
in
PF3130451Rev1_OTSPF_OB_I_GB_en_zug_R2.indd 112 3/12/15 11:36 AM
Statement of Use: Verify status before each use
Effectivity Date: Mar 18 2015 Status: Current State: Released
Type: Project File Name: 3130451 Revision: 1