OneTouch Select Plus Flex - Review the Pre-Set Low Range Limit Displayed; Review the Pre-Set High Range Limit Displayed

78
5
Editing Your Settings
1. Review the pre-set low range limit displayed
đƫ To accept the pre-set low
range limit, press
.
đƫ To edit the pre-set
low range limit, press
or to change
the value between
3.3mmol/L-6.1mmol/L,
and then press .
2. Review the pre-set high range limit displayed
đƫ To accept the pre-set high
range limit, press
.
đƫ To edit the pre-set
high range limit, press
or to change
the value between
5.0mmol/L-16.7mmol/L,
and then press
.
Your meter will exit settings mode and your last result
screen will appear.
Y
ellow= 5mm Red=7mm mar
g
in
PF3130451Rev1_OTSPF_OB_I_GB_en_zug_R2.indd 78 3/12/15 11:36 AM
Statement of Use: Verify status before each use
Effectivity Date: Mar 18 2015 Status: Current State: Released
Type: Project File Name: 3130451 Revision: 1