OneTouch Verio Reflect - Setting up Your Meter; Setting up Your System; Turn Your Meter on

26
2 Setting up your system
Setting up your meter
Turn your meter on
To turn your meter on, press and hold
until the
Welcome screen appears. Once the Welcome screen is
displayed, release . You can also turn the meter on by
inserting a test strip.
Every time you turn your meter
on, a Welcome screen will appear
for a few seconds. If the meter
does not power on, check the
batteries. See page138.
CAUTION:
If you see any missing pixels
within the Welcome screen, there
may be a problem with the meter.
Contact Customer Care. Contact
information for Customer Care is
listed at the end of this
Owner's Booklet.
Example
Welcome.
Let's get started.