57
UP-A1 series Dock for iPod—Continued
a Arrow [q]/[w] and ENTER buttons
Used to navigate menus and select items.
b Previous [7] button
Restarts the current song. Press it twice to select the
previous song.
c Rewind [5] button
Press and hold to rewind.
d Pause [3] button
Pauses playback.
e REPEAT button
Used with the repeat function.
f MUTING button (52)
Mutes or unmutes the AV receiver.
g ALBUM +/– button
Selects the next or previous album.
h VOL [q]/[w] button (50)
Adjusts the volume of the AV receiver.
i PLAYLIST [e]/[r] buttons
Selects the previous or next playlist on the iPod.
j RETURN button
Exits the menu or returns to the previous menu.
k Play [1] button
Starts playback. If the component is off, it will turn
on automatically.
l Next [6] button
Selects the next song.
m Fast Forward [4] button
Press and hold to fast forward.
n Stop [2] button
Stops playback and displays a menu.
o RANDOM button
Used with the shuffle function.
Status messages
❏ The AV receiver is checking the connection
with the dock
❏ The AV receiver does not support the
connected dock
❏ UP-A1 series Dock is connected
Your iPod is properly stationed in a UP-A1 series Dock
connected to the UNIVERSAL PORT jack of this unit,
and the connection between your iPod and this unit is
complete.
When connection is confirmed, “UP-A1” is displayed
for about 8 seconds.
❏ Dock is not connected
Your iPod was removed from a UP-A1 series Dock con-
nected to the UNIVERSAL PORT jack of this unit.
Note:
When the status message is not displayed on the AV
receiver’s display, check the connection to your iPod.
To Next Page
Loading...
Need help?
General
