94
Controlling Other Components—Continued
By pressing the REMOTE MODE button that’s been
programmed with the remote control code for your CD
player, you can control your player with the following
buttons.
The [CD] button is preprogrammed with the remote con-
trol code for controlling an Onkyo CD player.
For details on entering a remote control code for a differ-
ent component, see page 88.
a ON/STANDBY button
Set the component to On or Standby.
b Arrow [q]/[w]/[e]/[r] and ENTER buttons*
Used to navigate menus and select items.
c SETUP button*
Used to access the Onkyo CD player’s settings.
d [1], [3], [2], [5], [4], [7], [6]
buttons
Play, Pause, Stop, Rewind, Fast forward, Previous,
and Next.
e REPEAT button
Used with the repeat playback function.
f SEARCH button*
Used to locate specific points.
g Number buttons
Used to enter track numbers and times for locating
specific points. The [+10] button works as a +10
button or “--/---” button.
h DISPLAY button
Displays information about the current disc or track,
including elapsed time, remaining time, total time,
and so on.
i MUTING button (52)
Mutes or unmutes the AV receiver.
j DISC +/– button
Selects discs on a CD changer.
k VOL [q]/[w] button (50)
Adjusts the volume of the AV receiver.
l RANDOM button
Used with the random playback function.
m PLAY MODE button*
Selects play modes on components with selectable
play modes.
n CLR button
Cancels functions and clears entered numbers.
Notes:
• Buttons marked with an asterisk (*) are not supported
by the RI control.
• With some components, certain buttons may not work
as expected, and some may not work at all.
Controlling a CD Player
h
k
j
n
g
b
c
a
i
d
e l
fm
Press the appropriate
REMOTE MODE button first
To Next Page
Loading...
Need help?
General
