sound and turns off the display. The LED lights when it
is on, the display turns off, and the "Bass" and "Treble"
settings are disabled.
15.
RT/PTY button: Used when receiving stations
transmitting text information (P23).
16.
SPEAKER A/B button: Select the terminals to output
audio from between SPEAKERS A/B.
17.
INPUT dial: Switches the input to be played. Turn the
control to switch the source in the following order;
BD/DVD#CBL/SAT#PC#GAME#
TV/TAPE#CD#PHONO#AM#FM#DAB*#NET#
BLUETOOTH
* "DAB" can not be displayed if a USB DAB adapter
has not been connected.
18.
BASS dial: Adjusts the bass.
19.
TREBLE dial: Adjusts the treble.
20.
BALANCE dial: Adjusts the balance of the sounds
output from the left and right speakers.
21.
BGM 1/2/3/4 buttons: Preset your favorite DAB/AM/FM
radio stations (P25).
22.
USB jack: A USB storage device is connected so that
music files stored in it can be played. You can also
supply power (maximum 5 V/0.5 A) to USB devices
with a USB cable.
0 When connecting a HDD that requires more than 5
V/0.5 A, connect to the USB port (maximum 5 V/1 A)
on the rear of the unit.
Display
1. The currently selected speaker system lights.
2. Lights in the following conditions.
Ë: When headphones are connected
: When connected via BLUETOOTH
: When connected by Wi-Fi
NET: When "NET" is selected with the input selector and the unit is
connected to the network. It will flash if the connection to the network is
not correct.
USB: When "NET" is selected with the input selector and the unit is
connected by USB and the USB device is selected. Flashes if the USB
is not properly connected.
DIGITAL: Digital signals are input and the digital input selector is
selected.
3. Lights according to the type of input digital audio signals.
4. Lights in the following conditions.
RDS: Receiving RDS broadcasting.
TUNED: Receiving DAB/AM/FM radio
FM ST: Receiving FM stereo.
SLEEP: Sleep timer has been set.
AUTO STBY: Auto Stby (P31) has been set.
5. Flashes when muting is on.
6. Speaker/Channel display: Displays the output channel of the speakers.
7. This may light when performing operations with the "NET" input
selector.
8. Displays various information of the input signals.
To Next Page
Loading...
