Onkyo TX-RZ3100 - Page 11

"Auto":Usethisfunction
Select"Off"ifyourTVdoesnotsupport4K.
SuperResolution
DefaultValue:2
Whenyouhaveset"1080p>4KUpscaling"to"Auto",youcanselectthe
degreeofvideosignalcorrectionfrom"Off"andbetween"1"(weak)and"3"
(strong).
Zone2HDMI
DefaultValue:NotUse
MakethesettingwhenyououtputtotheZone2TVconnectedtotheHDMI
OUTZONE2/SUBjack.
"Use":Enablethisfunction
"NotUse":Disablethisfunction
OSDLanguage
DefaultValue:English
Selecttheonscreendisplaylanguagefromthefollowing.
(NorthAmericanmodels)English,German,French,Spanish,Italian,Dutch,
Swedish
(EuropeanandAsianmodels)English,German,French,Spanish,Italian,
Dutch,Swedish,Russian,Chinese
ImposeOSD
DefaultValue:On
SetwhetherornottodisplaytheinformationontheTVwhenthevolumeis
adjustedorinputischanged,forexample.
"On":OSDdisplayedontheTV
"Off":OSDnotdisplayedontheTV
OSDmaynotbedisplayeddependingontheinputsignalevenif"On"is
selected.Iftheoperationscreenisnotdisplayed,changetheresolutionof
theconnecteddevice.
ScreenSaver
DefaultValue:3minutes
Setthetimetostartthescreensaver.
Selectavaluefrom"3minutes","5minutes","10minutes"and"Off".
2.HDMIInput
YoucanchangeinputassignmentbetweentheinputselectorsandHDMIINjacks.
BD/DVD
DefaultValue:HDMI1（HDCP2.2）