Onkyo TX-RZ3100 - Listening Modes

ListeningModes
Toenjoydigitalsurroundplayback,suchasDolbyDigital,theaudiosignals
needtopassthroughaconnectionviaHDMIcable,digitalcoaxialcable,or
digitalopticalcable.Audiooutputshouldbesettobitstreamoutputonthe
connectedBlurayDiscplayerorotherdevice.
Press ontheremotecontrollerseveraltimestoswitchthedisplayofthe
mainunittochecktheinputformat.
Checkthefollowingiftheabovedoesnotfixtheproblem:
Cannotselectadesiredlisteningmode
ThereisnosoundwithDolbyTrueHD,DolbyAtmos,andDTSHDMaster
Audio(forcompatiblemodelsonly)
CannotselectPureAudiomode(forcompatiblemodelsonly)
AboutDTSsignals
Troubleshooting