Onkyo TX-RZ3100 - Page 23

5.DolbyEnabledSpeaker
DolbyEnabledSpeakertoCeiling
DefaultValue:6'0"/1.80m
SetthedistancebetweentheDolbyEnabledSpeakerandtheceiling.Select
between"0'0"1/2"/"0.01m"to"15'0""/"4.50m"(1/2/0.01munits).
Theunitofdistance(feet/meters)shownistheunitselectedforusein
"Distance".
AccuReflex
DefaultValue:Off
YoucanenhancethereflectioneffectofDolbyEnabledSpeakersfromthe
ceiling.
"Off":Donotusethisfunction
"On":Usethisfunction
Thissettingcanbeselectedwhen"Configuration""Height1Speaker"/"Height
2Speaker"issetto"DolbySpeaker".
6.EqualizerSettings
Youcanadjusttheoutputvolumeoftherangeofeachconnectedspeaker.You
canadjustthevolumeofthedifferentsoundrangesforeachofthespeakers.You
cansetthreedifferentequalizersinPreset1to3.Youcanselectuptofivebands
fortheSubwooferandninebandsforallotherspeakers.
Front
DefaultValue:0.0dB
Afterselectingthespeakerfrequencyfrombetween25Hz"and"16kHz"with
thecursors
/ ,adjustthevolumeofthatfrequencybetween"－6.0dB"and"＋6.0dB"
with / .
Center
DefaultValue:0.0dB
Afterselectingthespeakerfrequencyfrombetween25Hz"and"16kHz"with
thecursors
/ ,adjustthevolumeofthatfrequencybetween"－6.0dB"and"＋6.0dB"
with / .
Height1
DefaultValue:0.0dB
Afterselectingthespeakerfrequencyfrombetween25Hz"and"16kHz"with
thecursors
/ ,adjustthevolumeofthatfrequencybetween"－6.0dB"and"＋6.0dB"
with / .