117Lighting
Headlamps when driving abroad
The asymmetrical dipped beam increases
the field of vision on the passenger side of
the lane.
This causes glare for oncoming traffic if the
vehicle is driven in countries where traffic
drives on the opposite side of the road.
Do as follows to prevent glare:
Vehicles with halogen headlamps
Have headlights converted in a workshop.
Vehicles with Adaptive Forward Lighting 3
(AFL)
1. Pull and hold stalk for main beam on
steering wheel (headlamp flash).
2. Switch on ignition.
3. After approx. 3 seconds, an acoustic
signal sounds and then AFL control
indicator
B flashes approx. 4 seconds.
After the switch, AFL control indicator
B
flashes for 4 seconds each time the ignition
is switched on.
To return to asymmetrical dipped beam,
pull and hold the main beam stalk again,
switch on the ignition and wait for the
acoustic signal. AFL control indicator
B
will then discontinue flashing.
Control indicator
B 3 85. 3 112.
To Next Page
