124 Climate control
Picture no: 18210s.tif
Ventilation
z Set the temperature to the desired
setting.
z Switch fan on, select fan setting
according to requirements.
z For maximum ventilation in the head
area: set the air distribution switch to M,
open all air vents, direct the air vent slats
3 122.
z For ventilation to foot well: Set air
distribution switch to K.
z For simultaneous ventilation to the head
area and the foot well: Set air
distribution switch to L.
Heating
For rapid warming of the passenger
compartment:
z Turn the temperature switch clockwise as
far as it will go (warm).
z Set the fan to speed 3.
z Open air vents.
z Set air distribution switch to desired
position, preferably position J, 3 123.
The comfort and general well-being of the
vehicle occupants are to a large extent
dependent on a suitable ventilation and
heating setting.
To achieve temperature layering with the
pleasant effect of "cool head and warm
feet", set the air distribution rotary switch
to K or J and move the rotary
temperature switch to any position you like
(with temperature stratification effect in
the centre zone).
To Next Page
