41Keys, doors, windows, sun roof
Picture no: 18412s.tif
z Push the wiper stalk (right) up or down
and select status On or OFF, or input a
value for speed (P6) or value for volume
(P7),
z Pull turn signal stalk (left) and wiper stalk
(right) simultaneously to the steering
wheel until you hear a confirmation
signal (approx. 3 seconds).
The selected settings are now stored for the
key in the ignition lock. To activate and
deactivate the functions and set the
functions selected, please see the relevant
sections. For page references, see the
following table.
Repeat the procedure to program
additional keys.
Overview of programmable functions
Function
designation
Function Status ex works Description
P 1
Switch on the external lighting using the
remote control (lead-me-to-the-car
lighting function)
OFF 3 113
P 2
Automatic rear windscreen wiper when
reverse gear is selected
OFF 3 13
P 3
Lane change indication: three flashes
when the lever is moved slightly
On 3 11
P 4
Automatic locking OFF 3 34
P 5 3
Selective unlocking OFF 3 33
P 6
Speed warning OFF 3 92
P 7
Volume of the acoustic turn signal 3 3 110
To Next Page
Loading...
